Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Norell Inc THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 9.55mm OD X 9mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 9.55mm OD X 9mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
Chemglass Life Sciences Accessory: Hose Assembly, 4ft
Accessory: Hose Assembly, 4ft. For use with the CG-2025-10 Filter-Regulator-Lubricator. Pictured is the fully assembeld Filter-Regulator-Lubricator.
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX FDA VITON 17 25FT
Masterflex L/S Precision Pump Tubing, FDA-Compliant Viton, L/S 17; 25 ft, Avantor
Foxx Life Sciences EZBiopure Platinum Cured Silicone Transparent Tubing, 5mm (13/64") ID X 9mm (23/64") OD, 50FT
EZBiopure Silicone Tubing is engineered for peristaltic pumps and fluid transfer in pharma and biotech applications. Its ultra-smooth bore prevents particle entrapment and ensures superior purity. Designed to meet global Food and Pharmaceutical standards.
Features
High Precision: PLC-controlled extrusion using NSF-51 certified platinum-cured silicone resin.
Clean Production: Made and packaged in an ISO Class 7 cleanroom.
Tight Tolerances: Laser-inspected for consistent dimensions.
Compliant: Meets FDA 21 CFR, USP Class VI, USP Class 87, and ISO 10993.
Validated: Extractables/leachable data
Clear & Odorless: Excellent transparency with no taste or odor.
Biocompatible: Inert and safe for tissues and cells.
Compatible with autoclave, Ethylene Oxide, and gamma radiation.
Certifications
USP Class VI Certificate
ISO 10993 Certificate
Phthalates / Bis Phenol / Plasticizer free Certification
TSE/BSE Free Certification
5 years Shelf Life
Accuflow Systems 3/4 Inch PTFE Smooth Bore Hose
3/4 Inch ID PTFE Smooth Bore Hose Stainless Braided with Silicone Cover 24 Inches OAL
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 3-Stop, Peroxide-Cured Silicone 1.52 mm ID; 6/PK
Designed for optimal operation in your Ismatec pumps. It is resistant to ozone and UV light. It won't crack, swell or harden. Translucent yellow color. Temperature range: -50 to 74C (-58 to 165F).
Accuflow Systems Saint-Gobain Tygon Tubing, Thermoplastic, 1/8 in I.D., 1/4 in O.D.
Saint-Gobain Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tubing engineered for medical and diagnostic fluid handling where chemical compatibility, visual inspection, and low extractables are required. The tubing features a glassy-smooth inner bore to reduce buildup, and it offers resistance to flex-fatigue and abrasion for consistent fluid transfer in instrumentation.
- Crystal-clear thermoplastic for visual inspection and low extractables.
- 1/8 in I.D., 1/4 in O.D., 1/16 in wall, supplied in 100 ft length.
- Glassy-smooth inner bore reduces buildup and carryover.
- Resists flex-fatigue and abrasion for extended service life.
- Suitable for IVD analyzers, diagnostic instrumentation, and general fluid transfer.
- Maximum recommended operating temperature 165 °F (74 °C); vacuum rating 29.9 inHg (760 mmHg).
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 0.38MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 0.38 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon E-3603, Non-DEHP, 1/8"" ID x 3/16"" OD; 50 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 1/4"" X 3/8"" - 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
AVANTOR MASTERFLEX (VWR LLC) TBNG LMT-55 1.30MM ID 33FT/PK
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 1.30 mm ID; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) LAB TUBING 1/16""IDX1/8""OD 50FT
Non-DEHP Nominal Lab Tubing, 1/16" ID x 1/8" OD; 50 ft/Pk
AVANTOR MASTERFLEX (VWR LLC) Tygon Silicone Tubing, 3/32""ID x 7/32""OD, 50 ft/pack
Formulation: TYGON 3350 silicone, platinum cured. Applications: Pharmaceutical, cosmetic, industrial, and auto-analysis applications. Characteristics: Ultra-smooth inner surface reduces particle entrapment and minimizes bacterial growth. Good for mild to medium concentration bases, salts, and alcohols; is odorless, tasteless, and non-toxic. Transparent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600); meets USP Class VI requirements, NSF criteria and EP 3.2.9 requirements. Tubing is manufactured according to GMP. Temperature range: ¿112 to 392¿F (¿80 to 200¿C) Sterilize: With ethylene oxide, gamma irradiation, or autoclave for 30 min, 15 psi.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 7/16" X 1/2"- 50 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.